Skip to product information
1 of 2

Heirloom Ceramics

Laser Decal Paper (Packages of 10)

Laser Decal Paper (Packages of 10)

Regular price $31.99 USD
Regular price Sale price $31.99 USD
Sale Sold out
Shipping calculated at checkout.

Ceramic Decal Paper High Quality Packages of 10 FIRED-ON IMAGES™

Laser Printer Image Transfer Kit for ceramics

Fired-On Images is the only product that: 

  • Enables artists of any skill level to create amazing works of art
  • Perfectly renders high quality graphics, text, handwriting, and photos 
  • Is specifically manufactured for kiln firing
  • Is laboratory-tested permanent, food safe, and dishwasher safe
  • Works on any fire-able surface, including store-bought tiles and tableware
  • Includes foolproof step-by-step instructions and precise firing temp. guide
  • Provides tips on colorizing sepia images using on-hand supplies
  • Is backed by expert customer support
  • Works with any HP or Canon black-only laser printer (*not for use with inkjets or color laser printers)


Important update

As of 2019,  a few of HP’s NEW Black Laser printers have changed their toner formulation.  Before you buy a new HP printer for this process, please check the cartridge number on HP’s MSDS site to be sure your toner contains either Iron Oxide or Ferrite.    

There is also a link on  the FAQ page at   ALL Canon Black-Only laser printers still  work for this process. 


A full set of detailed Instructions comes with Fired-On Images 10-sheet pack

1. Will my printer work?

All models of Black toner only HP & Canon laser printers/copiers/fax with NO capability of printing in color. NO other brands, COLOR LASERS or INJETS and just to be clear…NO you cannot use just the black toner in your color machine.

2. Why has some toner wiped off or smudged BEFORE Firing?

The new printers are energy efficient and printer fuser may not get hot enough to adhere the image to the transfer paper. Run a few sheets of regular paper through the printer first before you print on the transfer paper. Newly opened toners sometimes deposit extra toner on the transfer paper. Using a roller (brayer) on a paper towel over images, avoids smudges.

3. Why has my image disappeared COMPLETELY after firing?

Make sure that you are using an HP or Canon BLACK Toner Only Laser printer/copier/fax to make your image. Use a fresh toner cartridge if your results fade over time. Only use authentic HP toners, no substitutes. Make sure to use only Fired-On Transfer Paper.

4. Why is my image very faint or faded AFTER firing?

Transfer firing temperature is too hot. Try again at a lower firing temperature* Most Cone 06 transparent glaze requires a much lower decal firing temp.(see instructions)

5. Why has my image wiped off or smudged AFTER firing ?

Transfer firing temperature too low, try again at a higher temperature.

6. Why does my image have big cracks in it?

A certain amount of microscopic cracking is normal but if you see large cracks after firing, this may be due to poor contact between the transfer and the surface (do not overlap or stretch the film. To avoid stretching Use a brayer (roller) on top of a paper towel to remove water and bubbles (no squeegies)

7. Can my images be in color?

All images fire to a lovely sepia brown. Color is added using traditional glazing techniques.

8. Will my glaze work with Fired-On Images Transfers?

All glazes cone 06- 10 will work… transfer firing temp is dependent on the glaze/ clay used. Firing Temp Chart is included with instructions

View full details